Aquarium water purification systems from Drs


Build-in Pressure Gauge
The minimum operating pressure for a RO (reverse osmosis) unit is 50 psi (pounds per square inch). This unit build-in pressure gauge to monitor the operating pressure of the system. If the operating pressure is too low, an RO pressure boosting pump can be added to increase the operating pressure to the ideal range.


Why do I need RO water ?
Tap water often contains impurities that can cause problems when added to an aquarium. These include phosphate, nitrate, chlorine, and various heavy metals. High levels of phosphate and nitrate fuel aggressive algae growth, and copper, often present in tap water due to leaching from pipes, is highly toxic to invertebrates. Because RO filters remove practically all of these impurities, they are becoming more popular among aquarists, particularly marine hobbyists. (please click for more information)

6 Stage – Aquarium Reef Reverse Osmosis/Deionization Water Filtration ..

The Triton line of aquarium reverse osmosis water filtration systems, designed by , are built with one goal in mind: to deliver the highest quality, professional grade products, incorporating earth friendly deisgns and components. We strive to offer the tools for the serious aquarist needed to maintaining the healtiest and most vibrant aquariums possible. Pure water’s not magic, it’s logic.

Best Reverse Osmosis System For Aquarium 2017 Reviews

Aquarium Reef Reverse Osmosis Water Filter System 150 with Booster Pump and frame mounted 3 stage aquariums reverse osmosis
The Ava Water Filter three-Stage Aquarium system also utilizes reverse osmosis to provide cleaning through a sediment filter removing contaminants as small as one micron. Further, a phosphate and silica membrane adds another layer of capture through a membrane design that lets water flow through, but not much else. The entire system is designed with a easy-to-use, compact design that takes little effort to install. The entire system, working in full mode removes up to 99 percent of impurities in regular municipal-fed water.
The four-stage design includes the following cleaning elements that fed water will go through:
• Stage 1 – a pre-filter sediment blocker that removes contaminants before they even get into the system and cause clogging.
• Stage 2 – A pre-filter carbon layer that helps remove both chlorine and bacteria from water flow.
• Stage 3 – Using reverse osmosis, the membrane filter takes out 98 percent of metals, salt, bacteria and any other contaminant in the water flow, many not visible to the naked eye.
All units are equipment with non-corrosive hosing and adapters so that connections do their job with water flow consistently. The unit will fit and work with any faucet that is designed with a ¾ inch hose thread end. If the faucet is different, then the user will need to obtain a faucet adapter for a proper connection.

FS201-DI - Pure-Pro Water Corporation

3 stage aquariums reverse osmosis
The Ava Water Filter three-Stage Aquarium system also utilizes reverse osmosis to provide cleaning through a sediment filter removing contaminants as small as one micron. Further, a phosphate and silica membrane adds another layer of capture through a membrane design that lets water flow through, but not much else. The entire system is designed with a easy-to-use, compact design that takes little effort to install. The entire system, working in full mode removes up to 99 percent of impurities in regular municipal-fed water.
The four-stage design includes the following cleaning elements that fed water will go through:
• Stage 1 – a pre-filter sediment blocker that removes contaminants before they even get into the system and cause clogging.
• Stage 2 – A pre-filter carbon layer that helps remove both chlorine and bacteria from water flow.
• Stage 3 – Using reverse osmosis, the membrane filter takes out 98 percent of metals, salt, bacteria and any other contaminant in the water flow, many not visible to the naked eye.
All units are equipment with non-corrosive hosing and adapters so that connections do their job with water flow consistently. The unit will fit and work with any faucet that is designed with a ¾ inch hose thread end. If the faucet is different, then the user will need to obtain a faucet adapter for a proper connection.

Reverse Osmosis System - Marine Depot